PA20° Module m3.25 Standard Involute Gear Hobbing
2022-05-31 16:11:11
jiangxingTools
2910
PA20° Module m3.25 Standard Involute Gear Hobbing
Tooth profile: DIN3972-2 standard, GB
Material：HSS M2, M35, ASP2030, ASP2052, S390
Accuracy：AA, A to DIN3968
Hob specification：OD 80 * Length 80 * Bore 32mm
Module: m3.25, with pressure angle: PA20°
相關(guān)文章
-
PA30° DIN5480 Involute Spline Hob with Module m2
PA30° DIN5480 Involute Spline Hob with Module m2Tooth profile：GB, DIN5480 standardMaterial：HSS M2, M... - Solid Carbide Small Module Gear Hob
- HSS M2, M35, M42 Material Gear Shaper Cutter with PVD Coating TiN, AP
- Effect of Hob Sharpening Errors
- PA20° Module m4.5 Standard Involute Hob
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobber Cutter with Module m2.5
- Built-up Gear Hob
