PA30° DIN5480 Involute Spline Hob with Module m10
2022-06-01 08:18:51
jiangxingTools
2742
PA30° DIN5480 Involute Spline Hob with Module m10
Tooth profile：GB, DIN5480 standard
Material：HSS M2, M35,ASP2052, S390
Accuracy：AA, A DIN3968
Hob sizes：OD 140 * Length 140 * Bore 40mm
Module m10 with pressure angle PA30°
相關(guān)文章
-
Module and DP Gear Hobs with 14°30′ – 45°
Module and DP Gear Hobs with 14°30′ – 45°Module : 0,1 – 40DP : 120 – 0,75PA : 14°30′... - Timing Pulley Hob for STS 14M
- Taper Shank Type Shaper Cutters with JIS B 4356
- PA20° Module m2.25 Standard Involute Gear Hobbing Cutter
- PA20° Module m3.5 Standard Involute Gear Hob
- Pre-cutting disc-type gear shaper cutter with DIN 3972/III
- Manufacturing Steps for Gear Shaper Cutter
