Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2851
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
HSS Fine Pitch Gear Hob Cutter with DIN 58412 Standard
HSS Fine Pitch Gear Hob Cutter with DIN 58412 StandardDIN 58412 N1, U1,V1 for gears with basic cutte... - PA20° Pre-shave Gear Hobber Cutter with Module m1.5
- PA20° Pre-shaving Gear Hob with Module m2
- Deep Counterbore Type Shaper Cutters with DIN 1826
- PA30° DIN5480 Involute Spline Gear Hob Cutter with Module m5
- PA20° Standard Gear Milling Cutter with Module m2.5
- HSS DIN 8002 Standard Solid Gear Hobs with M1~M20
