Solid Carbide Hob
2022-11-03 10:00:08
jiangxingTools
2719
Solid Carbide Hob
Processing step for tungsten carbide gear hob cutter as following:
step o1-raw carbide material
step 02-inside diameter
step 03-end face grinding
step 04-hub grinding
step 05-tooth groove grinding
step 06-tooth profile grinding
step 07-final inspection
step 08-coating
相關(guān)文章
-
RS35 Roller Chain Sprocket Hob with Pitch 9.525 x Roller Dia. 6.35
RS35 Roller Chain Sprocket Hob with Pitch 9.525 x Roller Dia. 6.35Material：HSS M2, M35, M42, S3... - PA30° DIN5480 Involute Spline Hob Cutter with Module m3
- K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
- Timing Pulley Hob for (AT.)D.T (D)T20
- Gear Shaving
- Powder Metallurgy HSS ASP 2052
- Hub-type shaper cutter with DIN 3972/II
