Taper Shank Type Shaper Cutters with GB 6081
2023-04-06 08:19:39
jiangxingTools
2514
Taper Shank Type Shaper Cutters with GB 6081
These shank type shaper cutters are 20° PA, non-topping finishing cutters, for spur gears.
tooth profile can be done with GB 6082, DIN 1829, JIS B 4356, and BS 5246
Nominal pitch dia. 25mm, 38mm, module range: m1-m3.75
Diametral pitch shank type shaper cutter can be made as your request.
morse stub taper number is No. 2 or No.3
相關(guān)文章
-
PA20° Standard Gear Milling Cutter with Module m1.5
PA20° Standard Gear Milling Cutter with Module m1.5Module: m1.5, pressre angle: 20°Dimensions of inv... - PA20° Profile DIN3972 Standard Gear Hobber Cutter with Module m4
- Large Module Hobs
- Convex Milling Cutter
- PA20° Pre-shaving Gear Hob with Module m7
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m2
- ?PA20° PCD 38mm Shank Type Gear Shaper Cutter with Module m1~m3.75
