K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
2023-05-03 09:56:58
jiangxingTools
2627
K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
Grade K40, K42, K44 carbide hobs are mostly used for large production, must be recoated after being resharpened.
Carbide gear hobs are offered with tooth profile DIN 3972 standard Non-Topping or Topping
module rangle for carbide hobs are M0.1-M5, OD Φ16-95, Length 8mm-180mm,bore Φ8-Φ40mm
carbide hobs for finishing cut, pre-grinding, pre-shaving, modified, chamfering, spline shaft, timing pulley, rectangular spline,triangular spline, worm/ratchet,etc special profile.
相關(guān)文章
-
Hobs for worm gears
Hobs for worm gearsThe flank form of a worm gear hob is determined by the flank form of the driving... - Straight Sided Spline Hob
- Gear Hobbing
- HSS Erasteel Bohler M35 Material DP and Module Gear Hob Cutter with AP Coating
- The Effect of Hob Mounting Errors
- Timing Pulley Hob for (AT.)D.T AT20
- HSS M42 Material for Gear Shaper Cutter and Gear Hob
