The Method of Hob Computation
2021-08-26 13:43:54
jiangxingTools
3230
The Method of Hob Computation
Normal pitch=Mn x Π（Mn: Normal Module)
Axial pitch=Mn/cos LA
Lead=Axial pitch x Number of start
LA(Lead Angle)=sin-1(Mn x Number of start/Hob PCD)
Cam amount(relief amount)=Hob OD x Π x tan(cam angle)/Hob NT
Cam angle: Generally PA20°-10°， 14.5°-12°，25°-9°
Groove Lead=Hob PCD x Π/tan LA
Flute depth= Total tooth height if a hob+ Cam amount+1.5mm
Hob's Relief Angle=tan-1(tan PA x tan Cam angle)
相關文章
-
Measurements on Gear Hobs in according to DIN3968
Measurements on Gear Hobs in according to DIN 3968Basic data on hobs: Drawing no., Normal module, Pr... - Gear Hob for Chain Sprockets to DIN 8196
- PM-HSS S390,S290,MC90 Gear Cutting Tools and Gear Hobs for Dry Cutting
- Solid Carbide Small Module Gear Hob
- RS80 Roller Chain Sprocket Hob with Pitch 25.4 x Roller Dia. 15.88
- K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
- PA20° Pre-shave Gear Hobber Cutter with Module m1.5
