Gear Shaving Machine
2022-03-16 14:43:21
jiangxingTools
3345
Gear Shaving Machine
Gear shaving machine is a metal cutting machine for gear finishing. Gear shaving machine is suitable for finishing unhardened gears, usually used for shaving straight or helical gears whose hardness is not greater than HRC48 after hobbing or shaping, and machining inner gears by adding accessories. The maximum diameter of the machined gear is 5 meters, but it is most widely used in the medium size gear shaveing machines under 500 mm. The shaving precision is 7-6 (JB179-83), and the surface roughness is 0.63 ~ 0.32 micron.
相關文章
-
PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m6.5
PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m6.5Tooth profile：DIN3972-2 standard, GB... - GB Standard Gear Shaving Cutters with M2~M8
- Nominal PCD 180mm M2.75 Gear Shaving Cutter with PA20°
- PA30° PCD 125mm Deep Counterbore-Type Gear Shaper Cutter with Module m8~m10
- PA20° Pre-shave Gear Hob with Module m1
- PA30° DIN5480 Involute Spline Hob with Module m10
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hob with Module m4
