Bohler S590 Microclean for Hobs
2022-08-19 11:55:41
jiangxingTools
2638
Bohler S590 Microclean for Hobs
Material composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5, V-3, W-6.30, Co-8.40
Standard: 1.3244, HS6-5-3-8, EN ISO 4957
Performance feature of Gear Hobs with S590:
Toughness & Ductility: high
Wear Resistance: good
Compressive strength: high
Edge Stability: high
Grindability: high
Hot Hardness (red hardness): high
相關(guān)文章
-
Timing Pulley Hob for (AT.)D.T AT10
Timing Pulley Hob for (AT.)D.T AT10timing belt profile: (A.T)D.Tbelt type: AT10common range: 12-15T,... - PA20° Module m1.5 Standard Involute Gear Hobber Cutter
- Parallel Side Spline Broach
- ?PA30° PCD 25mm Shank Type Gear Shaper Cutter with Module m1~m3
- PA20° PCD 100mm Disk Type Gear Shaper Cutter with Module m1~m6
- PA20° DIN3972 Standard DP Gear Hob
- Standard Gear Hob with Basic Profile DIN 3972-Ⅱ
